HP C410a Photo tray cannot engage, Photo tray cannot disengage, Missing HP Photosmart Software

Models: C410c C410d C410b C410a C410e

1 264
Download 264 pages 51.2 Kb
Page 196
Image 196

Solve a problem

Chapter 12

Cause: Paper might not feed properly if you are using the product in an extremely high- or low-humidity environment.

Photo tray cannot engage

Solution: Remove the output tray, and then replace it. Push the output tray in as far as it will go. Make sure the output is lowered all the way and lays flat.

Cause: The output tray was not inserted all the way.

Photo tray cannot disengage

Solution: Push the output tray all the way down.

Cause: The output tray was not lowered all the way.

Missing HP Photosmart Software

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Install the HP Photosmart Software

Solution 2: Turn on the product

Solution 3: Turn on the computer

Solution 4: Check the connection from the product to your computer

Solution 1: Install the HP Photosmart Software

Solution: Install the HP Photosmart Software that came with the product. If it is installed, restart your computer.

To install the HP Photosmart Software

1.Insert the product CD-ROM into your computer’s CD-ROM drive and then start the Setup program.

2.When prompted, click Install More Software to install the HP Photosmart Software.

3.Follow the onscreen instructions and the instructions provided in the Start Here guide that came with the product.

Cause: The HP Photosmart Software was not installed.

If this did not solve the issue, try the next solution.

Solution 2: Turn on the product

Solution: Turn on the product.

Cause: The product was turned off.

If this did not solve the issue, try the next solution.

194 Solve a problem

Page 196
Image 196
HP C410a, C410c, C410d, C410b, C410e Photo tray cannot engage, Photo tray cannot disengage, Missing HP Photosmart Software