HP C410e, C410c, C410a Finish setting up the HP Photosmart, Add the HP Photosmart to a network

Models: C410c C410d C410b C410a C410e

1 264
Download 264 pages 51.2 Kb
Page 9
Image 9

3Finish setting up the HP Photosmart

Add the HP Photosmart to a network

Set up the HP Photosmart for faxing

Add the HP Photosmart to a network

WiFi Protected Setup (WPS)

Wired (Ethernet) network

Wireless with a router (infrastructure network)

Wireless without a router (ad hoc connection)

WiFi Protected Setup (WPS)

To connect the HP Photosmart to a wireless network using WiFi Protected Setup (WPS), you will need the following:

￿A wireless 802.11 network that includes a WPS-enabled wireless router or access point.

￿A desktop computer or laptop with either wireless networking support, or a network interface card (NIC). The computer must be connected to the wireless network that you intend to install the HP Photosmart on.

To connect the HP Photosmart using WiFi Protected Setup (WPS)

Do one of the following:

Use the Push Button (PBC) method a. Select the setup method.

￿Press the Wireless button.

￿Highlight Wi-Fi Protected Setup and press OK.

￿Highlight Push Button and press OK.

b. Set up a wireless connection.

￿Press the corresponding button on your WPS-enabled router or other networking device.

￿Press OK.

c. Install the software.

NOTE: The product displays a timer for approximately two minutes, in which you must press the corresponding button on your networking device.

Finish setting up the HP Photosmart

7

Finish setting up the HP Photosmart

Page 9
Image 9
HP C410e, C410c, C410a Finish setting up the HP Photosmart, Add the HP Photosmart to a network, WiFi Protected Setup WPS