HP C410c Previously used genuine HP cartridge, To clean the printhead from the control panel

Models: C410c C410d C410b C410a C410e

1 264
Download 264 pages 51.2 Kb
Page 220
Image 220

Solve a problem

Chapter 12

Previously used genuine HP cartridge

Solution: Check the print quality of the current print job. If it is not satisfactory, try cleaning the printhead to see if that improves the quality.

To clean the printhead from the control panel

1.Press Setup.

2.Press the down arrow button to highlight Tools, and then press OK.

3.Press the down arrow button to highlight Clean Printhead, and then press OK. The product cleans the printhead.

4.Press any button to return to the Tools menu.

Follow the prompts on the display or computer screen to continue.

NOTE: HP recommends that you do not leave the ink cartridge outside of the printer for an extended period of time. If a used cartridge is installed, check the print quality. If it is not satisfactory, run the cleaning procedure from the toolbox.

Cause: The genuine HP ink cartridge was previously used in some other product.

Printhead appears to be missing or damaged

Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.

Solution 1: Reinstall the printhead and cartridges

Solution 2: Contact HP support

Solution 1: Reinstall the printhead and cartridges

Solution: Check to make sure the printhead and the cartridges are installed.

To reinstall the printhead

1.Make sure that the product is turned on.

2.Open the ink cartridge door.

218 Solve a problem

Page 220
Image 220
HP C410c, C410a, C410d, C410b, C410e manual Previously used genuine HP cartridge, To clean the printhead from the control panel