Chapter 3

splitter, or a parallel splitter which has two RJ-11 ports on the front and a plug on the back.)

Figure 3-10 Example of a parallel splitter

If your computer has two phone ports, set up the HP Photosmart as described below.

Figure 3-11 Back view of the HP Photosmart

Finish setting up the HP Photosmart

1Telephone wall jack

2"IN" phone port on your computer

3"OUT" phone port on your computer

4Telephone (optional)

5Answering machine

6Computer with modem

7Use the phone cord supplied in the box with the HP Photosmart to connect to the "1-LINE" port

To set up the HP Photosmart on the same phone line as a computer with two phone ports

1.Remove the white plug from the port labeled 2-EXT on the back of the HP Photosmart.

2.Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port labeled 2-EXT on the back of the HP Photosmart.

32 Finish setting up the HP Photosmart

Page 34
Image 34
HP C410e, C410c, C410a, C410d, C410b manual Example of a parallel splitter