Cleaning the MFP

General cleaning

To maintain print quality, clean the MFP thoroughly:

●every time you change the print cartridge

●whenever print-quality problems occur

Clean the outside of the MFP with a lightly water-dampened cloth. Clean the inside with only a dry, lint-free cloth. Observe all warnings and cautions regarding the cleaning tasks.

WARNING! Avoid touching the fusing area when cleaning the MFP. It can be hot.

CAUTIONTo avoid permanent damage to the print cartridge, do not use ammonia-based cleaners on or around the MFP except as directed.

To clean the paper path

1Before you begin these steps, turn the MFP off (button out) and disconnect all cables, including the power cord.

2Open the front cover of the MFP, rotate the green lever downward to the unlocked position, and remove the print cartridge.

CAUTION

To prevent damage to the print cartridge, use two hands when removing it from the MFP.

 

Do not expose the print cartridge to light for more than a few minutes. Cover the print cartridge

 

when it is outside of the MFP.

 

 

108 Chapter 9 MFP maintenance

ENWW