I/O submenu
Items in the I/O (input/output) menu affect the communication between the MFP and the computer.
Item | Values | Explanation |
|
|
|
I/O TIMEOUT=15 | Use this to select the I/O timeout period in seconds. (I/O timeout | |
|
| refers to the time, measured in seconds, that the MFP waits |
|
| before ending a print job.) |
|
| This setting allows you to adjust timeout for best performance. If |
|
| data from other ports appear in the middle of your print job, |
|
| increase the timeout value. |
|
| |
Parallel input submenu |
| |
Item | Values | Explanation |
|
|
|
HIGH SPEED=YES | YES | Accepts faster parallel communications used for connections with |
| NO | newer computers. |
|
|
|
ADVANCED | ON | Turn the bidirectional parallel communication on or off. The default |
FUNCTIONS=ON | OFF | is set for a bidirectional parallel port |
|
| This setting allows the MFP to send status readback messages to |
|
| the computer. (Turning the parallel advanced functions on might |
|
| slow language switching.) |
|
|
|
EIO X Jetdirect submenu
The EIO (enhanced input/output) submenu appears only when an EIO device is installed in an EIO slot on the MFP (such as an HP Jetdirect print server). The items in the menu depend on the particular accessory product installed. If the MFP contains an HP Jetdirect print server EIO card, you can configure basic networking parameters using the EIO menu. These and other parameters can also be configured through HP Web Jetadmin or other network configuration tools (such as by using Telnet or browsing the embedded Web server).
For more information about the EIO submenu, see the documentation that came with the EIO Jetdirect card.
ENWW | Configure device menu 207 |