To install a compact flash memory card

 

 

CAUTION

Do not insert a flash memory card that is designed for use with a digital camera into the MFP.

 

The MFP does not support photo printing directly from a flash memory card. If you install a

 

camera-type flash memory card, a message asking if you want to reformat the flash memory card

 

appears on the control-panel display. If you choose to reformat the card, all data on the card will

 

be lost.

 

1 Turn the MFP off and disconnect all power and interface cables.

 

2Loosen the two captive thumb screws on the back of the MFP.

3Grasp the screws and pull the formatter board out of the MFP. Place it on a flat, non-conductive surface.

4Remove the compact flash from the antistatic package. Hold the compact flash with fingers against the side edges and thumbs against the back edge. Align the notches on the compact flash with the compact flash slot.

ENWW

Installing memory 217