Message | Explanation or recommended action |
|
|
Gateways failed | The MFP was unable to locate either an SMTP or LDAP server. Verify the |
| gateway address. |
|
|
HP Digital | A digital send job has failed and cannot be delivered. Try to send the job again. |
Sending: |
|
Delivery Error |
|
|
|
INCORRECT | The wrong PIN was typed. |
| Return to the previous screen and type the PIN again. |
|
|
Initializing... | The MFP is starting up. |
|
|
INSERT OR | The specified tray must be inserted or closed for printing to continue. |
CLOSE TRAY xx |
|
|
|
INSTALL | The print cartridge has been removed or has been installed incorrectly. It must |
CARTRIDGE | be replaced or reinstalled correctly for printing to continue. |
|
|
INSUFFICIENT | The MFP does not have enough memory to load the data (for example, fonts or |
MEMORY TO LOAD | macros) from the location specified. Touch OK to continue without this |
FONTS/DATA | information. |
<DEVICE> | If the message persists, add more memory. |
| |
To continue |
|
touch OK |
|
|
|
INTERNAL DISK | The internal hard disk has failed. Turn the MFP off, and then turn the MFP on. |
NOT FUNCTIONAL | If the message persists, see the HP support flyer or go to www.hp.com/support/ |
| |
| lj9040mfp or www.hp.com/support/lj9050mfp. |
|
|
LDAP Gateway Not | The LDAP server is not communicating with the MFP. Verify the LDAP server |
Responding | address. Contact the network administrator. |
|
|
LDAP Gateway OK | The LDAP server has responded after exceeding the time out value for an |
| address request. |
|
|
LDAP Server is | The LDAP server has exceeded the time out value for an address request. |
not responding | Verify LDAP server address. |
Contact |
|
administrator |
|
|
|
LOAD TRAY xx To use another tray touch OK.
The job requires a specific media type and size that is not available.
Load the requested media into Tray 1.
Touch OK to use a media type and size that is available in another tray, or follow the instructions in the on screen dialog box.
LOAD TRAY 1 | The tray is empty or configured for a different size than the size requested. |
[TYPE][SIZE] | Follow the instructions on the |
ENWW | Understanding MFP messages 149 |