Configuring the trays by using the Paper Handling menu
You can configure the paper type and size for the input trays without a prompt on the MFP control panel display. Use the following procedure to gain access to the Paper Handling menu and configure the trays.
To configure the paper size for a tray
1 Touch MENU.
2 Touch PAPER HANDLING.
3 Touch TRAY N SIZE.
4 Touch the paper size loaded.
5 Touch EXIT to exit the menus.
Note | Depending on the size that you selected, the MFP might prompt you to move the Custom/Standard |
| switch in the tray to another position. The MFP might also prompt you to move the paper guides. |
| Follow the instructions on the control panel, and then close the tray. |
|
|
To configure the paper type for a tray
1Touch MENU.
2Touch PAPER HANDLING.
3Touch TRAY N TYPE.
4Touch the paper type loaded.
5Touch EXIT to exit the menus.
40 Chapter 1 The basics | ENWW |