Loading input trays

 

This section contains information about loading standard- and custom-size media into the four

 

input trays.

 

 

CAUTION

To avoid a jam, never add or remove paper from Tray 1 or open Tray 2, Tray 3, or Tray 4 while

 

printing or copying from that tray.

 

To avoid damaging the MFP, print labels, envelopes, and transparencies from Tray 1 only. Send

 

labels, envelopes, and transparencies to the upper bin. Print on only one side of labels, envelopes,

 

and transparencies.

 

 

Loading Tray 1

Tray 1 holds up to 100 sheets of paper or 10 envelopes. For more information about supported media, see Media specifications.

To load Tray 1 for occasional one-time use

Use this procedure if Tray 1 is usually left empty and is used for printing on a variety of sizes or types of paper.

1 Open Tray 1.

2Load paper according to size and finishing options. See Orienting media for information about loading preprinted, letterhead, and prepunched paper.

CAUTION

To avoid jams, print sheets of labels one sheet at a time.

ENWW

Loading input trays 29