Item | Values | Explanation |
|
|
|
AUTO CONTINUE=ON ON OFF
Determine how the MFP reacts to errors.
ON: If an error prevents printing, the message is displayed, and the MFP goes offline for 10 seconds before returning online.
OFF: If an error prevents printing, the message remains on the display, and the MFP does not print until Continue is touched.
Note
To stop printing when out of staples (when a stapler accessory is installed), set AUTO CONTINUE=OFF in the control panel System setup menu.
CARTRIDGE LOW= | CONTINUE | Determine how the MFP functions when toner is low. The |
CONTINUE | STOP | CARTRIDGE LOW message first appears when approximately |
|
| two weeks of typical printing remain in the cartridge. This |
|
| allows you sufficient time to order a new print cartridge. |
|
| CONTINUE: The MFP continues to print while the CARTRIDGE |
|
| LOW message is displayed. |
|
| STOP: The MFP goes offline and wait for further action. |
|
| For more information, see Managing the print cartridge. |
|
|
|
CARTRIDGE STOP
OUT=CONTINUE CONTINUE
Determine how the MFP behaves when toner is out.
CONTINUE: The MFP displays REPLACE CARTRIDGE until the cartridge is replaced. The MFP continues to print.
STOP: The MFP goes offline and waits until the cartridge is replaced.
JAM RECOVERY= | AUTO |
AUTO | ON |
| OFF |
Determine how the MFP functions when a jam occurs.
AUTO: The MFP automatically selects the best mode for MFP jam recovery (usually ON). This is the default setting.
ON: The MFP automatically reprints pages after a jam is cleared.
OFF: The MFP does not reprint pages following a jam. Printing performance might be increased with this setting.
LANGUAGE=ENGLISH | List of | Sets the language of the control panel. |
| available |
|
| languages |
|
|
|
|
206 Appendix B Control panel menus | ENWW |