6Close the tray.
7Look at the control panel within a few seconds of closing the tray. (Open and close the tray if the time has already elapsed.) The control panel displays the tray size and type configuration. Do one of the following:
•If the size and type settings are correct, touch EXIT to accept the settings.
•If the size and type settings are not correct, touch OK. The TRAY N SIZE=*<SIZE> menu is displayed.
8To change the size setting, touch the correct paper size. The message SETTING SAVED is displayed for a moment, and then the tray type menu is displayed.
Note | Depending on the size that you selected, the MFP might prompt you to move the Custom/Standard |
| switch in the tray to another position. The MFP might also prompt you to move the paper guides. |
| Follow the instructions on the control panel, close the tray, and then repeat this procedure starting |
| with step 7. |
|
|
9To change the type setting, touch the correct paper type. The message SETTING SAVED is displayed for a moment, and then the size and type settings are displayed.
10If the size and type settings are correct, touch EXIT to accept the settings. The tray is ready to use.
34 Chapter 1 The basics | ENWW |