Installing memory
To install DDR memory DIMMs
Use this procedure to install additional memory. Before you begin, print the configuration (touch Menu, touch Information, and then touch Print Configuration) to find out how much memory is installed in the MFP before adding more memory. The table lists the maximum amount of memory allowed for each DIMM slot.
|
| Slot label on the | Slot label on the | Description | |
|
| Configuration page | Formatter board |
|
|
|
|
|
|
|
|
|
| Slot 1 | J1 | 256 MB | |
|
|
|
|
|
|
|
| Slot 2 | J2 | Empty | |
|
|
|
|
|
|
|
| Total |
| 256 MB | |
|
|
|
| ||
|
|
|
|
|
|
CAUTION |
| Static electricity can damage DDR DIMMs. When handling DDR DIMMs, either wear an antistatic | |||
|
| wrist strap or frequently touch the surface of the DIMM antistatic package, then touch bare metal | |||
|
| on the MFP. |
|
|
|
|
|
|
|
|
|
To install memory
1If you have not already done so, print the configuration to find out how much memory is installed in the MFP before adding more memory.
2Turn the MFP off. Disconnect the power cord and any cables.
214 Appendix C MFP memory and expansion | ENWW |