Setting the registration

Use the Set Registration feature to center the front and back images on a page that has been duplexed (printed on both sides). This feature also allows edge-to-edge printing to be set to within approximately 2 millimeters of all edges of the paper. Image placement will vary slightly for each input tray. The alignment procedure must be performed for each tray. An internal-tray registration page allows the administator to calibrate each tray.

To set the registration

1Touch Menu.

2Touch Configure Device.

3Touch Print Quality.

4Touch Set Registration.

You can select a tray by specifying a Source. The default Source is Tray 2. If you want to set the registration for Tray 2, go to step 7. Otherwise, proceed to the next step.

5Touch Source.

6Touch a tray. After you touch the tray, the control panel display returns to the Set Registration menu.

7Touch Print Test Page.

8Follow the instructions on the printed page.

62 Chapter 3 Printing

ENWW