Message

Explanation or recommended action

 

 

CLOSE FRONT OR

The MFP was turned on with one of these doors open. Close the door, turn the

LEFT DOOR

MFP off, and then turn the MFP on.

To continue turn

 

off then on

 

 

 

CLOSE RIGHT DOOR

Close the vertical transfer door.

 

 

CLOSE RIGHT DOOR

The MFP was turned on with the right door open.

To continue turn

 

off then on

 

 

 

CLOSE STAPLE

Close the stapler access door on the output paper handling device.

DOOR

 

 

 

Creating...

The MFP is generating the cleaning page.

CLEANING PAGE

 

 

 

DATA RECEIVED

The MFP has received data but is waiting for a form feed or has been paused.

 

 

DIFFERENT PAPER

Different media sizes are being used for a single job in the multifunction

SIZES IN JOB

finisher.

 

Verify that all pages in the job are configured for the same size paper.

 

 

Deleting...

The MFP is deleting a stored job.

 

 

Digital Send

The MFP cannot communicate with the server. Verify the network connection.

server is not

 

responding

 

Contact

 

administrator

 

 

 

DUPLEXER ERROR

The duplexer has been removed. Reinstall the duplexer.

REMOVE DUPLEXER

 

Install duplexer

 

with power off

 

 

 

EIO X DISK NOT

The EIO hard disk is not working correctly.

FUNCTIONAL

Follow the instructions in the on screen dialog box.

 

 

 

E-mail Gateway did not accept the job because the attachment was too large

The scanned documents have exceeded the size limit of the e-mail server. Resend the job using a lower resolution, smaller file size setting, or fewer pages. Contact your network administrator to enable sending the scanned documents using multiple e-mails.

E-mail Gateway An e-mail gateway has exceeded the time out value. Verify the e-mail address. did not respond

ENWW

Understanding MFP messages 147