Checking the toner level
You can check the toner level using the MFP control panel, HP Toolbox, the embedded Web server, or HP Web Jetadmin.
Using the MFP control panel
1Touch Menu.
2Touch Information.
3Touch PRINT SUPPLIES STATUS PAGE.
See Supplies status page for information about the supplies status page.
Using HP Toolbox
The following conditions must be met in order to use this feature:
●The HP Toolbox software must be installed on your computer. (HP Toolbox is automatically installed as part of the typical software installation.)
●The MFP must be connected to a network.
●You must have access to the World Wide Web to order supplies.
To use HP Toolbox
1On the Start menu, click Programs, and then click HP toolbox. HP Toolbox opens in a Web browser.
2On the left side of the window, click the Status tab, and then click Supplies Status.
Note | If you want to order supplies, click Order Supplies. This opens a browser that produces a URL |
| where you can purchase supplies. Select the supplies that you want to order and then finish the |
| ordering process. |
|
|
Using the embedded Web server
1In your Web browser, type the MFP’s IP address to access the MFP’s home page. This takes you to the MFP status page.
2On the left side of the screen, click Supplies Status. This takes you to the supplies status page, which provides toner level information. See Supplies status page for information about the supplies status page.
Using HP Web Jetadmin
In HP Web Jetadmin, select the MFP. The device status page shows toner level information.
ENWW | Managing the print cartridge 117 |