Message | Explanation or recommended action |
|
|
Canceling... The MFP is cancelling a job. The message continues while the job is stopped,
<JOBNAME> the paper path is flushed, and any remaining incoming data on the active data channel is received and discarded.
CARD SLOT X NOT The compact flash card in the specified slot is not working correctly.
FUNCTIONAL
CARTRIDGE
FAILURE Return for Replacement
The cartridge is loaded and the shipping protection strip cannot be fully removed.
Return the cartridge for a new one. (See Parts and accessories, or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp.)
CARTRIDGE OUT | The cartridge does not contain any more toner. Printing cannot continue |
REPLACE | because damage to the MFP might result. Replace the print cartridge. |
CARTRIDGE |
|
|
|
CHECK CABLES | Make sure that the cable between the scanner and the MFP is connected. |
Then turn off | If the error persists, replace the cable. |
| |
then on |
|
|
|
CHECK CABLES | Make sure that the scanner is unlocked and the interface cable is seated |
CHECK SCANNER | correctly. |
LOCK |
|
To continue turn |
|
off then on |
|
|
|
CHECK COPY | Make sure that the Copy Connect board on the formatter is firmly in place. |
CONNECT CARD | Check for LED light activity on the Copy Connect board. |
| |
| If the problem persists, replace the Copy Connect board. |
|
|
Check the glass | A digital send or copy job has been performed from the scanner glass, but the |
and remove any | original document needs to be removed. |
paper, then |
|
press START |
|
|
|
Checking paper | The MFP rollers are rotating to check for possible jams. |
path |
|
|
|
CHOSEN PERSONALITY NOT AVAILABLE
To continue touch OK
A print job requested a MFP language (personality) that does is not available in this MFP. The job will not print and will be cleared from memory.
Print the job by using a driver for a different printer language, or add the requested language to the MFP (if possible).
CLEANING DISK | The hard disk or compact flash disk is being cleaned. Contact the network |
<X>% Complete | administrator. |
Do not power |
|
off. |
|
|
|
CLOSE FLATBED | Close the top cover before turning on the MFP. |
COVER DURING |
|
INITIALIZATION |
|
146 Chapter 10 Problem solving | ENWW |