|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See Misformed | See Page skew | See Curl or | See Wrinkles or | ||||
|
|
| |||||
|
|
|
|
|
|
|
|
Light print or fade
●The print cartridge might be low. Replace the print cartridge.
●Maintenance might be due. Check this by printing a copy of the supplies status page (see Supplies status page). If maintenance is due, order and install the printer maintenance kit. (See Parts and accessories, or go to www.hp.com/support/lj9040mfp or www.hp.com/ support/lj9050mfp.)
Specks
Specks might appear on a page after a jam has been cleared.
●Print a few more pages to see if the problem corrects itself.
●If specks occur frequently, set your MFP up to automatically run a cleaning page (see Using the MFP cleaning page).
●Clean the inside of the MFP and run a manual cleaning page to clean the fuser (see Cleaning the MFP and Using the MFP cleaning page).
●Try using a different type of paper.
●Check for print cartridge leaks. If the print cartridge is leaking, replace it.
Dropouts
●Make sure that the environmental specifications for the MFP are being met (see Environmental specifications).
●If the paper is rough and the toner easily rubs off, either try changing the fuser mode to High 1 or High 2, or try using a smoother paper.
●Try using a different paper type.
Lines
●Print a few more pages to see if the problem corrects itself.
●Clean the inside of the MFP and run a manual cleaning page to clean the fuser (see Cleaning the MFP and Using the MFP cleaning page).
●Replace the print cartridge.
●Maintenance might be due. Check this by printing a copy of the supplies status page (see Supplies status page). If maintenance is due, order and install the printer maintenance kit. (See the Parts and accessories or go to www.hp.com/support/lj9040mfp or www.hp.com/ support/lj9050mfp.)
158 Chapter 10 Problem solving | ENWW |