Note | The page icon in the Original section of the graphical display shows a representative image of |
| the original document. |
|
|
7Make any necessary adjustments to the contrast and reduction or enlargement by using the Contrast Control bar and the Reduce/Enlarge button in the image modification section of the graphical display.
8Touch Copy to view your options. You can select Basic options or Advanced options.
9Touch the Basic items that describe the characteristics of the copies you are making. The following options are available:
•Size and Type: Select Auto (paper size is matched to original size), or the copy size that you desire. Be sure that you have loaded the correct paper size in the tray.
•Number of Sides: Select
•Back Side Orientation: Select Normal or Flip (applies when
•Pages per sheet: Select 1, 2, 4, or Booklet.
If you select 4 pages per sheet, “Z” or “N” ordering is tailored to the page orientation, and the option to put a border around each smaller page is displayed.
.
“Z” ordering | “N” ordering |
•Borders: Select Border or No Border.
•Staple: Stapling options depend on your output device and the paper size selected.
10Touch the Advanced options, if necessary. Some of the options include the following items:
•Collation: Select Collated or Uncollated.
•Output Bin: Select the appropriate bin.
•Job Storage: Select On to indicate that the copy job should be stored on the MFP rather than printed. Select Off to copy the job normally. See Creating a stored copy job for more information.
•Enhance: touch Sharpness or Background Removal.
Note | The page icon in the Copy section of the graphical display shows a representative image of the |
| copy. |
| 11 Use the numeric keypad to type the number of copies, and then press START. |
|
76 Chapter 4 Copying | ENWW |