Understanding MFP messages

 

MFP messages appear on the control-panel display to relay the normal status of the MFP (such

 

as Processing Job), or an error condition (such as Close Right Door) that needs attention.

 

Resolving control panel messages lists messages that require attention, or that might raise

 

questions. Messages are listed in alphabetical order, with numeric messages at the end of the

 

list. Not all messages are listed, because some (such as Ready) are self-explanatory.

 

 

Note

Some MFP messages are affected by the AUTO CONTINUE and CLEARABLE WARNINGS settings in

 

the CONFIGURE DEVICE menu, System Setup submenu, in the control panel (See System setup

 

submenu).

 

Using the MFP help system

 

 

This MFP features a help system on the control panel that provides instructions for resolving

 

most MFP errors. Certain control-panel messages alternate with instructions about accessing

 

the help system.

 

Whenever a ? appears in an error message or a message alternates with FOR HELP TOUCH ?,

 

touch the key to view the help.

 

To exit the help system, touch .

If a message persists

●Some messages (for example, requests to load a tray or a message that a previous print job is still in the MFP memory) allow you to touch Continue to print, or to press STOP to clear the job and eliminate the message.

●If a message persists after performing all of the recommended actions, contact an HP-authorized service or support provider. (See the HP support flyer, or go to www.hp.com/ support/lj9040mfp or www.hp.com/support/lj9050mfp.)

144 Chapter 10 Problem solving

ENWW