Embedded Jetdirect submenu

Item

Options

Values

Explanation

 

 

 

 

TCP/IP

ENABLE

ON

OFF

HOST NAME

Enable the TCP/IP protocol.

Disable the TCP/IP protocol.

An alphanumeric string, up to 32 characters, used to identify the device. This name is listed on the Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address.

CONFIG BOOTP METHOD

DHCP

AUTO IP

Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server.

Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCP server.

Use automatic link-local IP addressing. An address in the form 169.254.x.x will be automatically assigned.

MANUAL

IP ADDRESS

MANUAL SUBNET

SETTINGS MASK

SYSLOG

SERVER

DEFAULT

GATEWAY

IDLE

TIMEOUT

Use the MANUAL SETTINGS menu to configure TCP/IP parameters.

The unique IP address of the MFP.

The subnet mask for the MFP.

The IP address of the syslog server used to receive and log syslog messages.

The IP address of the gateway or router used for communications with other networks.

The time period, in seconds, after which an idle TCP print data connection is closed (default is 270 seconds).

208 Appendix B Control panel menus

ENWW