Background removal

If you copy a document that is printed on colored paper, or if you use two-sided copying, you can enhance the copy quality by removing any background that might cause your copy to streak or blur. Touch the Enhance button to gain access to the embedded Background Removal screen. Adjust the amount of background removal by touching the arrows on the Background Removal control. The slider moves to the lighter or darker area of the Background Removal control bar.

Sharpness

The Sharpness control specifies the sharpness setting that the flatbed scanner uses when the MFP scans your original. Sharpness enhances the edges of the original so that faint or fine text and graphics are reproduced more sharply. Adjust the amount of sharpness by touching the arrows on the Sharpness control bar.

Contrast

The Contrast control allows you to determine the contrast and brightness of your copy. Touch the arrows on the Contrast control, and move the slider to the lighter or darker area of the Contrast control bar.

Copying multiple sized originals

If the original document contains mixed-size originals, for example, a letter-size document with several legal-size charts, see Using Job Mode for more information.

Creating a stored copy job

Turning on the job storage setting indicates that you want the copy job to be stored on the hard disk, and that you will print the job later. You must provide the following information to create a stored job:

1Touch Copy.

2Select your basic copy settings (see Copying by using user-defined settings).

3Touch the Advanced tab.

4At the Job Storage box, select On.

A popup dialog box is displayed, asking for the User Name, and Job Name. If Authentication Required is selected, a Personal Identification Number (PIN), if required. To enter the PIN, touch the small box next to Authentication Required. The keyboard is displayed when you select User Name and Job Name. The PIN is a four-digit number that can be typed on the numeric keypad.

5Type the User Name.

6Type the Job Name.

7Type the PIN, if required.

8Touch OK.

9Press START.

See Printing a stored job for information on printing a stored job.

ENWW

Copying multiple sized originals 79