2Load up to 10 envelopes in the center of Tray 1 with the side to be printed on facing up, and the postage end toward the MFP. Slide the envelopes into the MFP as far as they will go without forcing them.
3Adjust the guides to touch the envelope stack without bending the envelopes. Make sure that the envelopes fit under the tabs on the guides.
4Change the fuser levers (see To change the fuser levers).
To change the fuser levers
1Move the output device away from the MFP to gain access to the left door.
56 Chapter 3 Printing | ENWW |