8Open Tray 1.

9Load paper according to size and finishing options. See Orienting media for information about loading preprinted, letterhead, and prepunched paper.

CAUTION

To avoid jams, print sheets of labels one sheet at a time.

10Adjust the paper guides so they lightly touch the paper stack, but do not bend the paper.

11Make sure the paper fits under the tabs on the guides and not above the load level indicators.

Note

If printing on A3- or 11 x 17-size paper, or other long media, also pull out the tray extension until

 

it stops.

 

 

12Look at the control panel display within a few seconds of loading the paper. The tray configuration is displayed. (Open and close the tray again if the time has already elapsed.)

13Touch EXIT to exit the menus. The tray is ready to use.

ENWW

Loading input trays 31