Selecting an output location

It is recommended that you select an output location (bin) through your program or driver. (Where and how you make selections depends on your program or driver.) If you cannot select an output location from the program or driver, set the default product output location from the MFP control panel.

To select an output location at the control panel

1Touch Menu.

2Scroll to and touch Configure Device.

3Scroll to and touch Printing.

4Scroll to and touch Paper Destination to view the output bin options.

5Scroll to the output bin or device you want, and then touch OK. The control panel displays the message Setting Saved for a moment, and then returns to the previous screen.

Printing on envelopes

CAUTION

Note

You can print on envelopes from Tray 1 only, which holds up to 10 envelopes. Many types of envelopes can be printed on from Tray 1.

Printing performance depends on the construction of the envelope. Always test a few sample envelopes before purchasing a large quantity. For envelope specifications, see Media specifications or go to www.hp.com/support/lj9040mfp or www.hp.com/support/lj9050mfp.

Envelopes with clasps, snaps, windows, coated linings, exposed self-stick adhesives, or other synthetic materials can severely damage the MFP. Do not use envelopes with pressure-sensitive adhesive.

Use the following basic steps to print on envelopes.

1Load the envelopes in Tray 1. See To load envelopes in Tray 1.

2Change the fuser levers. See To change the fuser levers.

3Send the print job. See To print on envelopes from a program.

If envelopes are wrinkled when they exit the MFP, see Preventing wrinkles on envelopes for more information.

To load envelopes in Tray 1

1Open Tray 1, but do not pull out the extension. (Most envelopes feed best without the extension. However, oversize envelopes might need the extension.)

ENWW

Printing on envelopes 55