Message | Explanation or recommended action |
|
|
MANUALLY FEED [TYPE] [SIZE]
Load the requested media into Tray 1.
To override the message, touch OK if the required media is available in another tray.
Touch OK to use a type and size that is available in another tray.
Multiple page | This message is displayed when using Job Mode to |
scan mode |
|
|
|
Network | A digital sending feature has been configured, but a network connection is not |
connection | detected. Verify the network connection. Contact your network administrator. |
required |
|
For Digital |
|
Sending |
|
Contact |
|
administrator |
|
|
|
No job to cancel | The STOP button was pressed, but no active job or buffered data is present. |
| The message is displayed for approximately two seconds before the MFP |
| returns to the READY state. |
|
|
Novell Login | Novell authentication has been enabled for this destination. Enter Novell |
Required | network credentials to access the digital sending feature. |
|
|
OUTPUT PAPER | The paper path between the MFP and the external finishing device is open. |
PATH OPEN | Close the path to continue printing. |
|
|
Password or name | The user name or password is incorrect or mis typed. Retype the user name |
is incorrect. | and password. |
Please enter |
|
correct login. |
|
|
|
PERFORM PRINTER | The MFP has passed its prescribed |
MAINTENANCE | maintenance procedures. |
| To ensure optimum print quality, the MFP prompts you to perform routine |
| maintenance every 350,000 pages. To order a printer maintenance kit, see |
| Parts and accessories, or go to www.hp.com/support/lj9040mfp or |
| |
|
|
Performing | The MFP is performing a firmware upgrade. |
upgrade |
|
|
|
Processing | The MFP is generating the cleaning page. |
Cleaning Page |
|
|
|
Receiving | The MFP is receiving a firmware upgrade. |
Upgrade |
|
|
|
REINSERT | The duplexer has been removed and must be reinstalled. |
DUPLEXER |
|
150 Chapter 10 Problem solving | ENWW |