Note
Note
Copying by using the scanner glass
Use the scanner glass to copy small, lightweight (less than 46 g/m2 or 12 lb), or
1Place the document face down on the scanner glass.
2Make any image modifications, and select any copy settings, if necessary.
3If you are making only one copy, press START. If you are making multiple copies, use the numeric keypad to type the number of copies (up to 999), and then press START to begin copying.
If you are copying more than one page from the scanner glass, see Using Job Mode to make a
Copying by using the ADF
Use the ADF to make as many as 999 copies of a document that has up to 100 pages (depending on the thickness of the pages).
1Load the document face down in the ADF. The MFP can automatically detect the paper size.
2Make any image modifications, and select any copy settings.
3If you are making only one copy, press START. If you are making multiple copies, use the numeric keypad to type the required number of copies, and then press START.
Copying books
You can use the scanner glass to copy books.
1Place the book face down on the scanner glass.
2Align the book by using the book bindings. Look for the book graphic at the top of the scanner glass to check the alignment.
3Touch Copy.
4Touch Original.
5Select Book as the size.
6Touch OK.
You can skip a page by touching the Skip Page button above the page icon. Touch the button once to skip the left page, twice to skip the right page, and three times to cancel page skipping.
7Touch Copy Settings.
8Select any output settings you want. Select the paper size that is the closest match to the actual size of the book that you are copying.
9Touch OK.
10Use the numeric keypad to type the number of copies that you want.
11Press START.
If you are copying more than one page of a book, see Using Job Mode to make a multiple page copy job.
ENWW | Basic copying instructions 77 |