IBM DS6000 Series manual Figure B-27 Adding a multipath volume

When you get to the point where you will select the volumes to be added, you will see a panel similar to that shown in Figure B-27.Multipath volumes appear as DMPxxx. Highlight the disks you want to add to the disk pool and click Add.

Figure B-27 Adding a multipath volume

Note: For multipath volumes, only one path is shown. In order to see the additional paths, see “Managing multipath volumes using iSeries Navigator” on page 349.

The remaining steps are identical to those in “Adding volumes to an Independent Auxiliary Storage Pool” on page 334.

Appendix B. Using the DS6000 with iSeries 347