If the volume is planned for MSCP serving, then the UDID range is limited to
OpenVMS system administrators tend to use elaborate schemes for assigning UDIDs, coding several hints about physical configuration into this logical ID, for instance odd/even values or reserved ranges to distinguish between multiple data centers, storage systems, or disk groups. Thus they must be able to provide these numbers without additional restrictions imposed by the storage system. In the DS6000, UDID is implemented with full flexibility, which leaves the responsibility about restrictions to the customer.
Command Console LUN
HP StorageWorks FC controllers use LUN 0 as Command Console LUN (CCL) for exchanging commands and information with
Because the OpenVMS FC driver has been written with StorageWorks controllers in mind, OpenVMS always considers LUN 0 as CCL, never presenting this LUN as disk device. On HP StorageWorks HSG and HSV controllers, you cannot assign LUN 0 to a volume.
The DS6000 assigns LUN numbers per host using the lowest available number. The first volume that is assigned to a host becomes this host’s LUN 0, the next volume is LUN 1, and so on.
Because OpenVMS considers LUN 0 as CCL, the first DS6000 volume assigned to the host
cannot be used even when a correct UDID has been defined. So we recommend creating the first OpenVMS volume with a minimum size as a dummy volume for usage as the CCL.
Multiple OpenVMS hosts, even in different clusters, that access the same storage system, can share the same volume as LUN 0, because there will be no other activity to this volume. In large configurations with more than 256 volumes per OpenVMS host or cluster, it might be necessary to introduce another dummy volume (when LUN numbering starts again with 0).
Defining a UDID for the CCL is not required by the OpenVMS operating system. OpenVMS documentation suggests that you always define a unique UDID since this identifier causes the creation of a CCL device visible for the OpenVMS command show device or other tools. Although an OpenVMS host cannot use the LUN for any other purpose, you can display the multiple paths to the storage device, and diagnose failed paths. Fibre Channel CCL devices have the OpenVMS device type GG.
OpenVMS volume shadowing
OpenVMS disks can be combined in
The OpenVMS shadow driver has been designed for disks according to DEC’s Digital Storage Architecture (DSA). This architecture,
requirements which are handled by today’s SCSI/FC devices with other approaches. Two such things are the forced error indicator and the atomic revector operation for
When a DSA controller detects an unrecoverable media error, a spare block is revectored to this logical block number, and the contents of the block are marked with a forced error. This causes subsequent read operations to fail, which is the signal to the shadow driver to execute a repair operation using data from another copy.
326DS6000 Series: Concepts and Architecture
