Croma24 Service Manual
Install the Lower Roller Assembly and Stepper Motor
NOTE
Ensure that the stepper motor wires are exiting the motor casing in the “down” direction when completely installed. The wires should be opposite from the holes that secure the bracket to the platen.
1.Loosely attach the Stepper Motor to the Lower Roller bracket using Stepper Motor hardware as shown in Figure
2.Attach the Stepper Motor tension spring to the Stepper Motor and the Lower Roller Bracket. Tighten the Stepper Motor hardware to 8
DISASSEMBLY | ASSEMBLY/ |
|
|
