Integra CROMA24 service manual Alignments/Adjustments, Color Calibration

Croma24 Service Manual

Alignments/Adjustments

The ENCAD Croma24 printers are designed with a minimum of maintenance requirements in mind. Most of the adjustments are controlled and performed via software/firmware interaction that require you to run a subroutine and enter values on the computer. Programmed calibrations include: color calibration, deadband alignment, and X-axis calibration. The mechanical adjustment requirements include the pinch roller adjustments and the encoder strip height adjustments. No electrical alignments are required.

Color Calibration

This procedure describes how to check that the cartridges are properly aligned for color plotting & should be followed each time the ink cartridges are installed. Figure 3-10 is a representation of how a color calibration looks when printed.

Figure 3-10. Color Calibration.

MAINTENANCE

Maintenance 55