Croma24 Service Manual

MAINTENANCE

Figure 3-35. Service Special Information.

The Service Special Information Menu displays information about the printers plot and ON time (in seconds) as well as the Maximum PWM/Position and Carriage Shut Down Position.

Built In Test (BIT)

The Croma24 printer has a built in test mode which is used as an additional tool for the technician in troubleshooting. The BIT mode is a way of checking the performance of the printer while removing any interferance or conditions that may be caused by the computer or network. It is considered as a stand-alone test.

To perform the BIT test, a loopback cable is required and needs to be installed into the I/O ports before powering up the printer. If the printer is a GA or GA & CAD version, insert both the parallel and serial ends of the loopback cable before powering up.

Maintenance 75

Page 75
Image 75
Integra CROMA24 service manual Built In Test BIT, Service Special Information