Assembly\Disassembly5
Introduction
Chapter 5 contains the procedures for removal and replacement of the Croma24 printer assemblies and mechanisms. Illustrations are provided for clarity. Steps for each replaceable part may depend on parts already removed in previous disassembly directions. It is recommended that you read through each procedure before begin- ning the removal and replacement of any assemblies or mecha- nisms.
The following is a list of tools which are recommended to disassemble and reassemble the printer:
l#1 Phillips Torque Screwdriver
l#2 Phillips Torque Screwdriver
l#1 Slotted Torque Screwdriver
l#2 Slotted Torque Screwdriver
l#1 Phillips Screwdriver
l#2 Phillips Screwdriver
l#1 Slotted Screwdriver
l#2 Slotted Screwdriver
lTorque Screwdriver, Allen Hex Driver (4mm)
lTorque Screwdriver, Socket Head (4mm)
lWire Cutters
lNeedle Nose Pliers
l
lESD Wrist Strap
The following materials are also required:
lIsopropyl Alcohol
lCotton Swabs
lLint Free Cloth or Tissue
lDouble Sided Tape (1/16” thick, 3/4” wide)
lLoctite Blackmax, P/N 200172
A Hardware Kit is available for the printers. See Chapter 6 of this manual for the part number.
DISASSEMBLY | ASSEMBLY/ |
|
|
87
