Integra CROMA24 service manual Disassembly Assembly

Croma24 Service Manual

12.Secure the Lower Roller Assembly onto the Platen.

13.Attach the C-Bracket Assembly to the Platen by aligning the bracket onto the bracket guide pins and securing with attaching hardware. Ensure that the Pinch Rollers are centered on the lower rollers and that tension is being applied the the lower rollers.

14.Attach the Slide Shaft to the supports tightening to 15 in-lbs of torque using 3mm hex head torque screwdriver.

15.Attach the ground strap to the left side of the Slide Shaft.

16.Perform the Carrier Assembly, Carrier Belt, and the Frame Tensioner Reinstallation procedures to reinstall the Carrier Assembly.

DISASSEMBLY ASSEMBLY/

Assembly\Disassembly 121