Croma24 Service Manual

Figure 5-16. Installing Lower Roller Assembly.

3.Lower the Lower Roller Assembly into the Base of the printer by aligning the bracket guides with the base guide tracks. See Figure 5-16.

4.Slide the Lower Roller Assembly to the right until the left lower roller bracket is snug against the bracket stop guide.

5.Route the Stepper Motor wires through the wire access area and to the wire clamp. Attach the connector to J7 on the MPCB.

116 Assembly\Disassembly

Page 116
Image 116
Integra CROMA24 service manual Installing Lower Roller Assembly