Integra CROMA24 service manual Paper and Encoder Sensor Removal

Croma24 Service Manual

Figure 5-8. Paper and Encoder Sensor Removal.

2.To remove the Paper Sensor:

a.Unlock the connector at J3 and remove the flex cable.

b.Turn the Carrier Assembly over and hold it while firmly grasping the Paper Sensor between thumb and index finger. See Figure 5-8.

c.Pull straight up on the Paper Sensor and remove it from the Carrier Assembly.

3.To remove the Encoder Sensor:

a.Unlock the connector at J2 and remove the flex cable.

b.Turn the Carrier Assembly over and lay it with the top side facing down.

c.Push down on the plastic clip and at the same time push down on the Encoder until the plastic pieces on each side of

DISASSEMBLY ASSEMBLY/

Assembly\Disassembly 103