Croma24 Service Manual

4.Remove the Trailing Cable from the triangular portion of the Strain Relief.

5.Lift up on the short end of the tape and unfold the bend in the Trailing Cable.

6.Remove the Strain Relief by pushing the Trailing Cable down through the opening in the Strain Relief.

7.Disconnect the Trailing Cable connector at the J6 location on the MPCB. Use the thumb and forefinger to pull forward on the connector lock and remove the Trailing Cable from the connector. See Figure 3-6 if necessary.

Figure 5-10. Trailing Cable Assembly Removal/Installation.

106 Assembly\Disassembly

Page 106
Image 106
Integra CROMA24 service manual Trailing Cable Assembly Removal/Installation