Integra CROMA24 service manual Carrier Belt Clamp

Croma24 Service Manual

9.Push the Carrier Belt through the Frame Tensioner enough to remove the Idler Pulley Assembly from the Frame Tensioner, and then set aside the Idler Pulley Assembly and the Frame Tensioner. (See Figure 5-6 for part identification, if necessary.)

10.Slide the Carrier Assembly and Drive Belt off the left side of the Slide Shaft.

Figure 5-5. Carrier Belt Clamp.

11.Once the Carrier Assembly is removed from the Slide Shaft, turn it over so that you can see the Belt Clamp. See Figure 5-5.

12.To disengage the Carrier Belt from the Belt Clamp, push the Carrier Belt away from the left post of the Belt Clamp and gently lift up until the bottom edge of the Carrier Belt clears the top of the left post.

13.Push the Carrier Belt away from the right post of the Belt Clamp and gently lift up to finish removing the Carrier Belt from the Belt Clamp.

DISASSEMBLY ASSEMBLY/

Assembly\Disassembly 97