Maintenance3

Introduction

This chapter contains general maintenance and cleaning instruc- tions for the Croma24 printer.

Scheduled Maintenance

Scheduled maintenance consists of a list of checks that are planned to be performed on a regular basis or when conditions warrant it.

Scheduled maintenance can be thought of as preventive mainte- nance since its purpose is to prolong the life of the printer. It is not intended to repair or isolate an existing problem, though it can sometimes be helpful in detecting a condition due to a weakened component that has not yet completely failed.

Below is a list of scheduled maintenance checks and their periodic- ity.

Clean external areas:

weekly, or

 

as required

Clean slide shaft:

monthly

Clean service station:

biweekly

Clean encoder strip:

monthly

Clean cartridge dimples:

if prime fails

Clean flex cable contacts:

if prime fails,

 

or cartridge

 

is replaced

Clean and inspect motor gears:

annually

Clean and inspect MPCB:

annually

Clean and inspect carrier assembly:

annually

Reseat connectors on MPCB:

annually

Reseat connectors on carrier board:

annually

Replace carrier bushings:

biannually

MAINTENANCE

43

Page 43
Image 43
Integra CROMA24 service manual Maintenance3, Scheduled Maintenance