Kodak ESP 7 manual Parts Power Location

Chapter 10

•Follow all warnings and instructions marked on the Kodak All-in-One printer.

Parts

Caution: Do not disassemble this product; there are no user-serviceable part(s) inside. Refer servicing to Kodak’s qualified service personnel.

Warning: Keep out of reach of children. Ink may be harmful if swallowed.

Power

Caution: If the power cord or plug is frayed or damaged, the equipment gets wet, or the equipment does not operate normally when the operating instructions are followed, unplug your printer from the power outlet and have qualified service personnel service your printer.

Caution: The alternating current (AC) adapter power supply is equipped with a three-wire grounding type plug. If you cannot insert the plug into the power outlet, contact an electrician to check or replace the power outlet.

Caution: For added protection from damage during a lightning storm, or when your printer and its associated alternating current (AC) adapter are unused for long periods of time, unplug the AC adapter from the power outlet.

Warning: Pushing objects through the equipment openings can result in an electric shock or fire.

Caution: Do not plug the alternating current (AC) adapter into a household extension cord.

Warning: The use of an accessory not recommended by Kodak could cause fire, an electric shock, or injury.

Location

Caution: To prevent your printer from overheating, do not block or cover the slots and openings in the equipment, place it near a heat register, or install it in a cabinet without proper ventilation.

Kodak ESP 7 Printer User Guide 101