Kodak ESP 7 manual Printing slow, Printing stops

Caution: For best results, use Kodak paper and ink cartridges for your Kodak All-in-One printer.

Print too light

.

Chapter 9

•Make sure the paper is loaded with the print side face down. Reload it if necessary.

•Try taking the picture again with the flash off. Refer to your camera user’s guide for details.

•Adjust the exposure compensation on your camera and try taking the picture again. Refer to your camera user’s guide for details.

•Edit the picture on your computer.

Printing slow

Note: When printing a large number of prints, printing may slow down to prevent the printhead from overheating.

•Make sure the printer is not placed in direct sunlight or is not operating in a high- temperature environment (higher than 95° Fahrenheit or 35° Celsius).

•Close any unnecessary software applications.

•Make sure your computer meets the minimum system requirements. Upgrade your system if necessary.

Printing stops

Printing stops during mid-print. Paper stops feeding, and status light may blink.

Caution: For best results, use Kodak paper and ink cartridges for your Kodak

All-in-One printer.

To check the paper:

1Remove any loose paper from the printer. Check the paper access door in the rear of the printer.

2Inspect the paper supplies and reload with new paper if necessary.

3Carefully “fan” the paper to keep the sheets from sticking together.

4Reload the paper tray. Do not overload.

5Press Start to continue.

Kodak ESP 7 Printer User Guide 83