Chapter 2
Kodak ESP 7 Printer User Guide 15
Status lights

The tables below describe the meaning of each light and condition, and offer tips on what

action to take.

On/Off Light
Light Status Cause Action/Solution
Off The printer is turned off. Press On/Off to turn the printer on.
The printer does not have power
applied.
Ensure that the printer power cord is
properly plugged into the back of the
printer.
Verify that the power supply and or
power cord LED is lit.
Check that the power supply is
connected to the power cord, and that
it is properly connected to the
electrical outlet.
Blinks The printer is initializing or busy. None. Allow the printer to finish the
initialization process.
On The printer is ready. None.
Most power supplies used with this ESP All-in-One printer are equipped with a status light which
illuminates when electricity is applied. If you cannot determine if the power supply is working properly
contact Kodak Service & Support for assistance.
Printer Power Cord Light
Light Status Cause Action/Solution
Off The printer power cord is not
properly connected to the printer.
Reconnect the printer power cord plug
to the printer.
The electrical power cord is not
properly connected to your electrical
outlet.
Reconnect the cord to the electrical
outlet. Ensure that the electrical
power cord is fully connected to the
alternating current (AC) adapter at
the end of the printer power cord.
The electrical outlet has no power. Plug a working device into the wall
outlet to test it, or have it checked by
an electrician.
The problem may lie with the power
supply.
Check the power supply status light, if
available. As needed, visit Kodak.com
for additional troubleshooting steps,
or contact Kodak Service & Support.
On The power supply is supplying power
to the printer.
None.