Kodak ESP 7 manual Configuring network settings, Setting your Kodak printer as the default

Chapter 3

Setting your Kodak printer as the default

For Windows XP

1Click Start, point to Settings, and then double-click Printers and Faxes.

2Right-click the icon for the Kodak ESP 7 printer, and then select Set as the Default Printer on the shortcut menu.

For Windows Vista

1Click Start, click Control Panel.

2Click Hardware and Sound and then click Printers.

3Right-click the icon for the Kodak ESP 7 printer, and then select Set as the Default Printer on the shortcut menu.

For Macintosh

Whenever a new printer is installed on the Macintosh operating system, it becomes the default printer. If you have more than one printer connected to your computer, use the following steps to change your default printer.

1Click System Preferences.

2In the Hardware section click Print & Fax.

3Select the Kodak ESP 7 printer from the list of available printer as the default.

Configuring network settings

You can connect your ESP All-in-One printer to a wired (Ethernet) network or to a wireless (Wi-Fi) network. You may refer to the “Start Here” booklet that came with your printer, or

review the following sections as needed.

Networking resources

This section only covers how to setup your printer with your existing network. It presumes you have a working understanding on how your network is configured. Additional resources for related topics, information, and network troubleshooting are available at www.kodak.com/go/inkjetnetworking.

If you are unsure of how your network is configured, please contact your network administrator or your internet service provider for assistance.

Configuring an Ethernet network connection

You will need the following items to connect the All–in–One printer to a wired (Ethernet) network:

Kodak ESP 7 Printer User Guide 23