Kodak ESP 7 manual Chapter

Chapter 3

•If more Wi-Fi networks are detected than can be shown on the LCD screen, the display includes the (page down) symbol and/or the (page up) symbol on the

LCD screen. As appropriate, press or on the control panel until you locate the network you want to use.

The last two options displayed are Unlisted network and Rescan for wireless networks.

Note: In your setup, instead of <Network name> as shown in the illustration above, the LCD screen will show the actual network name (SSID), without the brackets, and the signal strength, displayed as a percentage, of each available Wi-Fi network within range.

4With the desired network selected, press OK. You may need network identification information such as a security string, in order to authenticate your connection.

Note: You will need to know the network name (SSID) of the Wi-Fi network and its security string to connect your printer to the network successfully. Contact your Internet provider or the person who helped you configure your network to assist you.

5If you are looking for a Wi-Fi network that does not broadcast its SSID, see “Connecting to an unlisted network” below.

Note: If your printer was last connected to an available network on the list, the network settings are saved and the printer will automatically attempt to reconnect you to that network.

6If the network requires the entry of a security string, the keyboard will be shown on the

LCD screen. Press , , or to select a key. Press OK.

7Enter the security string. The correct upper and lower case characters and numbers are required.

Note: To erase any letters or numbers entered in error, select <BKSP> (backspace) and press OK.

Kodak ESP 7 Printer User Guide 27