Handling Paper
38 Kodak ESP 7 Printer User Guide
Loading envelopes
1Remove all other paper from the paper tray you plan to use.
2Place one or more envelopes along the right edge of the paper tray, with the front side
down and the envelope flaps pointing toward the left side of the tray.
3Squeeze the paper edge guide and move it to the right until it just touches the loaded
envelope(s).
4Close the paper tray and lower the paper output tray.
Loading legal size paper
1Remove all other paper from the bottom tray.
2Press and hold the paper tray extension-
release, located on the inside of the front of
the bottom paper tray.
3Pull the tray extension toward you gently
until it stops moving easily. DO NOT pull the
extension far enough to disengage from the
paper tray.
4Let go of the tray release and then load the paper in the tray.
5Squeeze the paper edge guide and move it to the right until it just touches the loaded
paper.
6Squeeze the paper edge guide and move it towards the printer until it just touches the
loaded paper.
7Push the paper tray in towards the printer.
8Press the bottom paper extender tab on the front left edge of the tray while pushing the
paper tray in towards the printer.
Warning: Do not load envelopes with cutouts or cellophane windows in this
printer.
Note: Review “Things to keep in mind” on page 35.