Kodak ESP 7 All-in-One printer Home Center software, Home Center for Windows, Wi-Fi Status Light

Chapter 2

Wi-Fi Status Light

Light Status	Cause	Action/Solution
Off	This indicates that the Wi-Fi radio	None.
	is turned off and the printer is not
	connected to a wireless network.
Blinks	The Wi-Fi radio is turned on and	None, unless you want to stop the
continuously	the printer is searching for available	connection process. If so, turn the Wi-Fi
	wireless networks within range.	radio off.
Blinks	The Wi-Fi radio is turned on and:	Press OK to turn off the error message
intermittently	• The printer cannot find any	on the LCD screen and then turn the
The LCD	available wireless networks	Wi-Fi radio off.
screen	within range.	Run the Wi-Fi Setup Wizard to find and
displays an	or	connect to an available wireless network
error	• The Wi-Fi network connection	within range.
message
	has been interrupted, or is too
	weak to send signals to and
	from the printer.
On	The Wi-Fi radio is turned on and	None.
	there is a working connection
	between the printer and a wireless
	network.

If you acknowledge the error message by pressing OK, the light will go off. However, if the Wi-Fi radio is not turned off and the printer cannot establish a connection to an existing Wi-Fi network, the light will resume blinking, and the error message will display again.

All-in-One printer Home Center software

Kodak Home Center software is installed on your computer during the setup process. The software functionality for Windows or Macintosh users is described below.

Home Center for Windows

Once installed, Kodak All-in-One printer Home Center software allows you to print, copy, scan, and configure your All-in-One printer from your Windows XP or Vista computer.

To open the Home Center software window on your computer, use the Home Center icon on the Desktop or in the Start Menu.

From the All-in-One printer Home Center main menu, selecting one of the six menu items enables you to:

•Scan pictures and documents

Kodak ESP 7 Printer User Guide 17