Kodak ESP 7 manual Memory card slots, Memory cards supported

Chapter 2

Number Component name

17Rear-access cleanout area

18Printer access door

19Printhead

Support for connecting digital memory devices to the printer

Your All-in-One printer allows you to connect both digital camera memory cards and USB- connected devices for previewing and printing. You can also transfer photos and document files to your connected computer.

Caution: Connect only one external memory device to your printer at a time. If both memory card slots, or any memory card slot and the host USB port have a device connected to them simultaneously, the printer cannot access the photos or documents contained on any of them. If your printer cannot recognize a device you have connected to it, make sure that only one device is connected at a time.

Memory card slots

Although this All-in-One printer has two card slots, insert and use only one memory card

at a time.

Warning: Do NOT remove the memory card while the light blinks, or you may damage the card.

A blue light, located above the memory card slots, blinks while the card is being accessed and stays lit while the card remains in the slot and the printer is on.

Memory cards supported

The Kodak ESP 7 All-in-One printer supports the following memory cards, used in most digital cameras:

XD xD-Picture Card

MS Memory Stick, Memory Stick Pro and Magic Gate

SD Secure Digital Card, Multi-Media Card

Kodak ESP 7 Printer User Guide 5