Kodak ESP 7 manual Maintaining Your Printer, General care

• Avoid placing objects on the printer.

• Keep the printer supplies away from direct sunlight and out of high-temperature environments.

• Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer.

• If the printer has been exposed to bad weather or has water inside it, turn it off and let it dry completely. If this does not solve the problem, contact customer support (see “Contacting Kodak Customer Service & Support” on page 2).

Keep the surrounding area vacuumed and litter-free.

To clean the printer, wipe the outside with a clean, dry cloth.

•

•

• Protect the printer from tobacco smoke, dust, sand, other small particles (such as crumbs), and liquid spills.

Caution: Always disconnect the power on the All-in-One printer before cleaning it. Do not use harsh or abrasive cleaners or organic solvents on the printer or any of its parts.

8

Maintaining Your Printer

Your Kodak ESP 7 All-in-One printer requires little maintenance. However, Kodak recommends cleaning the scanner glass and lid backing regularly to remove dust and fingerprints. Fingerprints and other debris on the glass or lid backing could slow down the printer’s performance, and affect the quality and accuracy of scanning.

Service agreements are available in some countries. Contact dealers for Kodak products for more information.

For recycling and or disposal information, contact your local authorities. In the U.S., visit the Electronics Industry Alliance Web site at www.eiae.org.

General care

Kodak ESP 7 Printer User Guide 59