Lexmark XM1100 Series manual Smtp Setup menu, Understanding the printer menus 153

Understanding the printer menus		153
	Use	To
	Job Buffering	Temporarily store print jobs in the printer hard disk before printing.
	Off	Notes:
	On
		• Off is the factory default setting.
	Auto
		• On buffers jobs on the printer hard disk.
		• Auto buffers print jobs only if the printer is busy processing data from another
		input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.
	Mac Binary PS	Set the printer to process Macintosh binary PostScript print jobs.
	On	Notes:
	Off
		• Auto is the factory default setting.
	Auto
		• On processes raw binary PostScript print jobs.
		• Off filters print jobs using the standard protocol.
	ENA Address	Set the network address information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Set the netmask information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
	ENA Gateway	Set the gateway information for an external print server.
	yyy.yyy.yyy.yyy	Note: This menu is available only when the printer is attached to an external print
		server through the USB port.
SMTP Setup menu
	Use		To
	Primary SMTP Gateway		Specify SMTP server gateway and port information.
			Note: 25 is the default SMTP gateway port.
	Primary SMTP Gateway Port
	Secondary SMTP Gateway
	Secondary SMTP Gateway Port
	SMTP Timeout		Specify the amount of time in seconds before the server stops trying to
	5–30		send an e‑mail.
			Note: 30 is the factory default setting.
	Reply Address		Specify a reply address of up to 128 characters in the e-mail sent by the
			printer.