Lexmark XM1100 Series manual Understanding the printer menus 163

Understanding the printer menus		163
	Use	To
	Allow Background Removal	Specify whether image background removal is allowed in copy, fax,
	On	e‑mail, FTP, or scan‑to‑flash‑drive jobs.
	Off	Note: On is the factory default setting. The background of the
		image will be removed.
	Allow Custom Job Scans	Scan multiple jobs to one file.
	On	Note: On is the factory default setting. If On is selected, then
	Off	Allow Custom Job Scans can be enabled for specific jobs.
	Scanner Jam recovery	Specify how a scan job should be reloaded if a paper jam occurs in
	Job Level	the ADF.
	page Level	Note: Job Level is the factory default setting.
	Web Page Refresh Rate	Specify the number of seconds between Embedded Web Server
	30–300	refreshes.
		Note: 120 is the factory default setting.
	Contact Name	Specify a contact name for the printer.
		Note: The contact name will be stored on the Embedded Web
		Server.
	Location	Specify the location of the printer.
		Note: The location will be stored on the Embedded Web Server.
	Alarms	Set an alarm to sound when the printer requires user intervention.
	Alarm Control	When activated, Alarm Control lets you set the number of times
	Cartridge Alarm	that the alarm sounds, while Cartridge Alarm lets you stop printing
		when a cartridge-low condition occurs.
		For each alarm type, select from the following options:
		Off
		Single
		Continuous
		Notes:
		• Single is the factory default setting for Alarm Control. This
		sounds three quick beeps.
		• Off is the factory default setting for Cartridge Alarm. This
		means no alarm will sound.
		• Continuous repeats three beeps every 10 seconds.
	Timeouts	Specify the number of minutes of inactivity before the printer
	Standby Mode	enters a lower power state.
	Disabled	Note: 15 is the factory default setting.
	1–240